Finite element analysis for the unsteady nearshore circulation due to wave-current interaction (I)—numerical model

In this paper, a numerical model for predicting the unsteady nearshore circulation due to wave-current interaction was proposed. In addition to the traditional continuity, momentum and energy equations, the dispersion and refraction relations were included in the governing equations. Moreover, the effects of lateral shears, wind, radiation and bottom stresses were analysed in the governing equations. Therefore, we expect that this model may more completely and exactly reflect the law of wave-current interaction. In part (II) we will adopt the selective lumping two-step explicit finite element method to solve the model, and some examples will be presented.     

Theoretical analysis of non-uniform extensional flows in relation to processing rheology and predictions of some constitutive equations

In this paper, a characteristic equation involving the stream function, already given by one of the authors in a previous work for classifying axisymmetric incompressible flows, is re-considered. Non-uniform nearly extensional flows are derived as particular solutions from this equation. Using experimental data in the literature for polymer solutions and melts, it is proved that particular solutions of the characteristic equation lead to kinematics very close to those encountered in the fiber-spinning process. The kinematic equations satisfactorily correlating the fiber-spinning data are used in order to determine the ability of constitutive equations to predict realistic stresses in the flow domain. The rheological parameters of the fluids, obtained from experiments, are used for computation of differential and integral constitutive equations in the spinning conditions. Comparisons with the stress response of adequate constitutive equations are given and discussed.Also affiliated to: Université Joseph Fourier Grenoble I and Institut National Polytechnique de Grenoble, Associé au CNRS (URA 1510)     

相关分析与谱分析在表面形貌研究中的应用

本文通过对表面形貌进行相关分析与谱分析,提出了相对波度和有效波度、相对波长和有效波长的概念,并且指出相关分析与谱分析是研究表面形貌润滑效应的有力工具。作者认为,当相对波度为有效波度时,应当同时考虑波长和幅值的摩擦学效应;当相对波度为高频的粗糙度时,只需考虑表面形貌的幅值效应。     

结构形状优化与智能模型化

阻碍形状优化软件广泛应用的障碍之一是依据自然设计度量描述和建立设计模型、分析模型、优化模型以及实现三个模型之间的转换.本文称这一困难为结构形状优优设计软件的适用性.本文提出了一种方法用来动态地确定平面连续体结构形状优化过程中的边界,应用基于人工智能方法的启发式规则与技术,自动生成由设计单元法表示的几何模型,也就是将一个结构自动剖分成若干个大的四边形映射单元.这些大单元对于进一步的网络生成是必要的,同时也是向全自动计算机辅助形状优化系统前进的重要一步.     

剪切弯曲下短深梁位移数值计算精度的研究

分析了短深梁位移的基本解，评述了有限元解法中关于高次分布力简化为节点力的问题。使用虚功原理和位移线性插值推导了满足二次分布力作用的精确节点力分配公式。通过矩形截面悬臂梁自由终端受集中载荷的算例，阐明了提高短深梁位移计算精度的途径。     

Flow properties of a dusty-gas point source in a supersonic free stream

By using Lagrangian method, the flow properties of a dusty-gas point source in a supersonic free stream were studied and the particle parameters in the near-symmetry-axis region were obtained . It is demonstrated that fairly inertial particles travel along oscillating and intersecting trajectories between the bow and termination shock waves . In this region, formation of " mufti- layer structure" in panicle distribution with alternating low- and high density layers is revealed. Moreover, sharp accumulation of particles occurs near the envelopes of particle trajectories .     

On the flows produced by sudden application of a constant pressure gradient or by impulsive motion of a boundary

Some properties of the time-dependent Navier-Stokes equations are discussed for flows impulsively started from rest by sudden application of a constant pressure gradient or by the impulsive motion of a boundary. Five illustrative examples are given. They are: unsteady flow in a circular cylinder moving parallel to its length, starting flow in a circular pipe, unsteady flow in a rotating cylinder, starting flow in a rectangular channel moving parallel to its length and unsteady flow in a channel of rectangular cross-section. It is found that the expressions of the quantities such as velocity, flux and skin friction are in series forms which may be rapidly convergent for large values of the time but slowly convergent for small values of the time or vice versa. It is shown that if their expressions can be found for one of large values of the time or small values of the time, these expressions can be used for the other.     

翼型与风洞侧壁交接角区分离流动研究

运用Navier-Stokes数值模拟对翼型模型试验时风洞侧壁和翼型模型结合部拐角区黏型分离流动进行模拟,并将简单代数湍流模型扩展用于机翼/风洞侧壁拐角区流动.计算格式在空间上采用中心有限体积离散,在时间上采用多步Runge-Kutta时间步长格式进行积分.结果显示,在翼型模型风洞试验时,模型/侧壁拐角区、模型表面、侧壁表面和模型后形成复杂的黏性分离流动和二次分离,对实验结果产生很大的影响.     

考虑疲劳裂纹扩展三维效应的James—Anderson修正方法

James-Anderson方法是一种借助材料疲劳裂纹扩展速率性能来确定三维裂纹应力强度因子的重要实验方法。本文对James-Anderson方法中的疲劳裂纹扩展三维效应进行了分析，并对其进行修正。修正后的James-Anderson方法考虑了疲劳裂纹扩展中由于应力状态而引起的三维效应。研究结果表明：和James-Anderson方法相比，修正后的James-Anderson方法得到的应力强度因子和三维数值方法所得的应力强度因子更吻合。     

燃烧器配风对W型火焰锅炉炉内空气动力场影响的实验研究

针对珞瑛厂引进法国Stein公司360MW的W型火焰锅炉进行了冷态模化研究，采用热线风速仪对炉内流场进行测试，研究了燃烧器配风（改变各次风动量流率比）对炉空气动力场的影响规律，并对所得结果进行了比较与分析。研究表明，燃烧器各次风的合理配比对W型火焰锅炉燃烧工况的组织是非常重要的。